Painting Galvanized Steel Siding

If possible bring a sample to a professional.

Painting galvanized steel siding.

Step 4 retouch. Use the ladder for painting the steel siding on the top and using the roller paint in a horizontal direction. Paint coatings by sherwin williams. If you have a kitchen then you probably already have this handy solution.

Galvanized metal is difficult to paint because it s coated with a layer of oil to prevent white rust. Wipe the galvanized surface down with white vinegar. White vinegar is both effective and non toxic so it is much safer to use than your average industrial solvent. Painting a galvanized steel panel roof is not all that different from painting other metal objects but you must ensure that the surface is perfectly clean before beginning the application process.

Click the link below and get directions to your closest sherwin williams store. All you have to do is simply apply the vinegar to a clean rag and then wipe down the galvanized surface. This information is essential to know even if you have pre finished metal siding. Go over the metal with a wire brush to remove any oxidation.

Repeat the procedure until you cover all the steel siding. 4 brush on the first coat of paint. Then put the paint of your desired color in the rolling pan and cover your paint roller with the paint. Before painting galvanized metal such as drip strips around eaves or roof flashing take the following steps so the paint will adhere properly and not peel.

The secret to painting galvanized steel is white vinegar. Galvanized steel should not be painted with oil based paint. For the most dependable results look for paints that are formulated specifically to bond to galvanized steel. Galvanized steel is less prone to rust since it has a special zinc coating which needs to be thoroughly cleaned and roughened so that the primer paint will adhere to it properly.

If the paint job is carried out correctly with all of the necessary preparations it should last many years without any noticeable corrosion. The enamels in alkyd paints can react with the slick zinc finish on a galvanized steel surface leading to poor adhesion and peeling. Many paint manufacturers offer multi purpose enamel or a direct to metal paint. Alkyd and oil based paints may seem to stick at first but the oily layer eventually sheds the paint.